challenger 18
draft
3.5”
beam
6’8”
WEIGHT
400LBS
Length
18’0”
MAX HP
60HP
2 degree
SPECS AND HIGHLIGHTS
*Specs and performance may vary
*NEW 2026 model
(challenger 1.0 is still available by request)
challenger 2.0
Deadrise: 2 degrees
Full Carbon and Base Carbon
Draft: 3.5” - 4”
Engine options: Tohatsu 30hp, Yamaha 25hp, Mercury 40hp, Tohatsu 50hp
Optional Side Console with Hydraulic Steering available
Speed: One person w/ 50hp 38 - 40mph
Fuel:13 - 21 gallon fully baffled aluminum marine fuel tank.
All Chittum Skiffs are water tested and checked by all departments before delivery.
2026 CHALLENGER 2 UPDATES:
Full and base carbon option
Larger spray rails
6” wider beam (same as Mangrove)
Closed bulkheads
Forward bulkhead hatch and aft deck hatch
Up to 50HP rating
Dry rear locker with bilge pump box
challenger 1.0
Deadrise: 2 degrees
100% Carbon only
Draft: 3.5” - 4”
Speed: 30hp: 28-32 MPH
Engine options: Tohatsu 30hp, Yamaha 25hp
Optional Side Console with Hydraulic Steering available.
Fuel: 6 -gallon removable plastic or 13 -gallon fully baffled aluminum marine fuel tank.
All Chittum Skiffs are water tested and checked by all departments before delivery.
-
Stiffy push-pole holders.
Engine manufactured fuel filter.
Carbon Fiber sealed box rigged with Rocker switches.
All wiring is of highest quality/tinned with heat shrink connectors.
High-capacity rod racks under gunnels with 14 large diameter flush fly rod tubes running fore and aft. Cockpit sides and rod racks covered in Marine Mat.
Poling platform cored with SeaDek with clear-coated carbon fiber underneath.
LED Navigation lights: Billet Stainless Steel shark eye lights by Livorski. LED stern light.
1500 GPH automatic bilge pump.
Lectrotab 316 stainless steel mirror polished 12”x 12” trim tabs.
Heavy duty rub rail.
EPCO bow and stern eyes.
Aft Seat Cushion.
contact us for a quote or consultation
